Refresher

Bona water-based Timber Floor Refresher maintain & revive your Timber Floor.

Bona Wood Floor Refresher is a ready to use water-based maintenance coating specifically designed for polyurethane coated timber floors in domestic situations. It revives a dull surface giving a newly finished look and continuing protection against wear. • Specifically designed for finished timber floors • Based on polyurethane – superb protective qualities • Contains no waxes • Meets EN 14904:200…

Key features

Specifically designed for finished timber floors
Based on polyurethane – superb protective qualities
Contains no waxes
Meets EN 14904:2006 for slip resistance
under normal climate conditions, 20C / 60% R.H. with

Physical properties

Appearance	may be applied after this time. Avoid heavy traffic and replacing furniture for [Bona_Timber_Floor_Refresher_TDS.pdf]

Application

Method	applicator-pad
Dilution	Do not dilute [Bona_Timber_Floor_Refresher_TDS.pdf]
Coverage	Ca. 30 – 50m2 / Lt per coat [Bona_Timber_Floor_Refresher_TDS.pdf]
Dry time	Approx. 2 hours* [Bona_Timber_Floor_Refresher_TDS.pdf]

Compatibility

Target surfaces	sealed-timber
Target finishes	waterborne, polyurethane
Not recommended for	unsealed-timber, oiled-timber, wax-sealed

Compliance

Use cases

Environments	domestic

Documents

Data for this page is generated from bona-timber-floor-refresher.json in the Bona build corpus, sourced from the Bona-published TDS, SDS and brochure PDFs listed above. The structured JSON is also used by the clause builder and the Aiden chatbot. Anything shown as — is a data gap we haven't been able to source from Bona yet.