Polish

Bona Hard Surface Floor Polish

Bona Hard-Surface Polish is a ready-to-use water-based maintenance coating for a large variety of hard surface floors including laminate flooring, vinyl, linoleum, unglazed tile (ceramic, quarry), stone and sealed marble. It brings a new shine to existing gloss floor surfaces whilst offering extended protection against wear. • Durable, reinforced with polyurethane • Fills in micro-scratches • Easy…

Key features

Durable, reinforced with polyurethane
Fills in micro-scratches
Easy and safe to use
Works with a wide range of surfaces
Quick drying
High gloss only
GREENGUARD certified
Recoating: minimum 2 hours
Under normal climate conditions, 20° C / 60% R.H. with reasonable

Physical properties

Appearance	Remove loose dust/grit etc. using a vacuum cleaner, soft broom or other dry [Bona_HardSurface_Floors_Polish_TDS.pdf]

Application

Method	applicator-pad
Dilution	Do not dilute [Bona_HardSurface_Floors_Polish_TDS.pdf]
Coverage	Approx. 50 m² / Lt per coat [Bona_HardSurface_Floors_Polish_TDS.pdf]
Dry time	- Touch dry: 30 - 60 minutes [Bona_HardSurface_Floors_Polish_TDS.pdf]

Compatibility

Target surfaces	tile, stone, vinyl, lvt
Not recommended for	unsealed-timber, oiled-timber

Compliance

Use cases

Environments	domestic

Documents

Data for this page is generated from hard-surface-floor-polish.json in the Bona build corpus, sourced from the Bona-published TDS, SDS and brochure PDFs listed above. The structured JSON is also used by the clause builder and the Aiden chatbot. Anything shown as — is a data gap we haven't been able to source from Bona yet.