Bona DriFast Sealer vs DriFast Stain — what's the difference?
See data table comparing Bona DriFast Sealer and Bona DriFast Stain across 21 specification fields.
DriFast Sealer is clear primer/sealer; DriFast Stain is pigmented colour application.
This comparison is strictly data side-by-side. No recommendation is made — the right choice depends on project conditions (traffic class, substrate, environment). Values are pulled directly from the respective product TDS; empty cells mean Bona does not publish that field.
| Field | Bona DriFast Sealer | Bona DriFast Stain |
|---|---|---|
Chemistryidentity.chemistry |
solvent | solvent |
Components (1K / 2K)identity.components |
1 | 1 |
VOCphysical_properties.voc |
550 g/L | max 550.0 g/L |
Solidsphysical_properties.solids_content |
37 % | 35-40 % |
Densityphysical_properties.density |
typical 0.87 g/mL | typical 0.86 g/mL |
Coats requiredapplication.coats_required |
1 | 1 |
Coverage (m2/L)application.coverage_m2_per_l |
15.0-17.0 m2/L | 20.0-40.0 m2/L |
Mixing ratioapplication.mixing_ratio |
— | — |
Pot lifeapplication.pot_life_hours |
— | — |
Recoat timeapplication.recoat_time_hours |
1.5-2 h | 2-18 h |
Light useapplication.light_use_hours |
— | — |
Full useapplication.full_use_hours |
— | — |
Temperature rangeapplication.temperature_range_c |
18-27 C (absolute minimum use: 16 C) | 20 C |
Humidity rangeapplication.humidity_range_pct |
30-60 % RH | 40-60 % RH |
Abrasion (Taber)performance.abrasion_taber |
— | — |
Slip P-rating (AS/NZS 4586)performance.slip_classification_as_nzs_4586 |
— | — |
Slip R-rating (DIN 51130)performance.slip_r_rating |
— | — |
Non-yellowingperformance.non_yellowing |
— | — |
Commercial gradeuse_cases.commercial_grade |
— | Yes |
Suitable outdoorsuse_cases.suitable_outdoors |
No | No |
EMICODE / VOC compliancecompliance.voc_compliance |
— | — |
Sources
- PDF Bona DriFast Sealer TDS · p.1-4
- PDF Bona DriFast Stain Specification Paragraphs · p.1-2