Domestic sealed (waterborne/polyurethane) timber floor maintenance
Environments: domestic
Surfaces: sealed-timber
Finishes: waterborne, polyurethane, solvent-borne
Primary source: Domestic_Timber_Floors_Maintenance.pdf — April 2022 — Bona Australia
Actions
Source: Prevention — Domestic_Timber_Floors_Maintenance.pdf
Products: bona-timber-spray-mop-kit, bona-microfibre-mop-pads
Pad/cloth: Bona Dusting Pad
NEVER wet mop a timber floor. Regular removal of sand prevents surface scratching
Source: Cleaning — Domestic_Timber_Floors_Maintenance.pdf
Products: bona-timber-floor-cleaner
Pad/cloth: Bona Microfibre Cleaning Pad
Dosing: Spray surface sparingly; mop along the boards
Rinse or replace cleaning pad after every 10-15 m². Pads are machine-washable at 60°C up to 500 times without fabric conditioner.
CONTRAINDICATION: Do not use household cleaners or polishes; they may damage the finish and make future overcoating difficult
Source: Cleaning — Domestic_Timber_Floors_Maintenance.pdf
Products: bona-oxy-power-timber-deep-cleaner
Pad/cloth: Bona Deep Clean Pad
Dosing: Dry clean first; mop; then spray area and let cleaner work for 1 minute before wiping with Deep Clean pad
Hydrogen peroxide formula -- also effective as a disinfectant against bacteria and viruses on hard non-porous surfaces (CDC)
Source: Deep Cleaning — Domestic_Timber_Floors_Maintenance.pdf
Products: bona-timber-floor-refresher
Pad/cloth: Bona Applicator Pad on Bona Mop
Dosing: Clean floor first with Wood Floor Cleaner, allow to dry, apply even coat along the boards; trafficked after 2 hours; avoid replacing rugs/furniture for 24 hours
Treat the whole floor, not small areas. Sheen level may increase with repeated use on low-sheen floors.
CONTRAINDICATION: Do NOT use on: Bona Traffic HD Anti-Slip; Bona Traffic HD Raw; other matt/extra-matt finishes; stair treads (slip resistance requirement)
Source: Maintenance / Refresher — Domestic_Timber_Floors_Maintenance.pdf
Refurbishment is usually driven by appearance damage (scratches, dents) rather than finish wear. Overcoating requires thorough clean + surface prep per Bona overcoating instructions followed by an application of the appropriate finish.
Source: Refurbishment — Domestic_Timber_Floors_Maintenance.pdf
Contraindication summary
- Do NOT wet mop -- excess water causes swelling and raised board edges
- Do NOT use household cleaners or polishes -- damages finish and blocks future overcoating
- Do NOT use Refresher on anti-slip / raw / matt finishes or on stair treads